Available From TopLine:  Bonding Wire Catalog Made By: High Performance Bonding Wire Aerospace & Defense     Au Gold Bonding Wire GSA • GMH-2 C-Be • M3-Be Au Gold Ribbon Wire AuR-Standard AuR3-Be Doping Gold Ribbon Aluminum Bonding Wire TABN Al-Si1% All Types Gold Wire General Purpose Gold Wire References: Applications ±Tol • RLC • AWG Handling • EL • BL Part#   •  Order Nbr Spool   •  Green Start Bonders • Capillary Library & Reference   About TANAKA: TANAKA Precious Metals is the premier manufacturer of bonding wire to the semiconductor, defense and aerospace industry. TANAKA also offers a full range of Gold (Au), Silver(Ag), Aluminum (Al), bare Copper (Cu) and Palladium Coated Copper (PCC) covering all applications of wedge, ball and bump bonding. High performance flat Gold for RF modules and power applications. Now available on 1/2-inch "H" spools for manual bonders.     Green=Start • Red=End.     Gold (Au) High Performance Bonding Wire  •   Other Sizes Type Alloy Ø Diameter ±1% μm Breaking Load (gf) EL (%) Spool Size Length Meters Length Feet Part Number Order Nr GMH-2 4N Au 99.99% Gold Be Doping Ø 20µm (Ø 0.8 mil) ≥ 5.0 gf Min 3~5% AL2(W) 2-Inch 100m 328ft GMH2-20A100(EL3-5) 302202 GMH-2 4N Au 99.99% Gold Be Doping Ø 25µm (Ø 1.0 mil) ≥ 9.0 gf Min 4~8% 4% Min AL2(W) 2-Inch 100m 328ft GMH2-25A100(EL4-8) 302252 GMH-2 4N Au 99.99% Gold Be Doping Ø 25µm (Ø 1.0 mil) ≥ 15.0 gf Min 0.5~3.0% AL2(W) 2-Inch 100m 328ft GMH2-25A100(EL3) 302254 GMH-2 4N Au 99.99% Gold Be Doping Ø 25µm (Ø 1.0 mil) 11~21 gf 2.0~5.0% AL2(W) 2-Inch 100m 328ft GMH2-25A100(EL2-5) 302257 GHA-2 4N Au 99.99% Gold Be Doping Ø 25µm (Ø 1.0 mil) ≥ 6.0 gf Min 3.5~7% AL2(W) 2-Inch 100m 300m 328ft 984ft GHA2-25A100(EL4-7) GHA2-25A100(EL4-7) 338252 338254 GSA 4N Au 99.99% Gold Ø 25µm (Ø 1.0 mil) 9.0~14.0 gf 3~6% AL2(W) 2-Inch 100m 328ft GSA-25A100(EL3-6) 300254 GSA 4N Au 99.99% Gold Ø 25µm (Ø 1.0 mil) 9.0~14.0 gf 2~6% AL2(W) 2-Inch 100m 328ft GSA-25A100(EL2-6) 300258 M3 4N Au 99.99% Gold Be Doping Ø 25µm (Ø 1.0 mil) ≥ 9.0 gf Min 3.5~6% AL2(W) 2-Inch 100m 328ft M3-25A100(EL3.5-6) 303254 GHA-2 4N Au 99.99% Gold Be Doping Ø 25.3µm (Ø 1.0 mil) ≥ 6.0 gf Min 4.0~7% AL2(W) 2-Inch 300m 984ft GHA2-25A300(EL4-7) 338254 GLF 4N Au 99.99% Gold Ø 25µm (Ø 1.0 mil) 8.7~16.5 gf 2~6% AL2(W) 2-Inch 100m 328ft GLF-25A100(EL2-6) 307252 GMH-2 4N Au 99.99% Gold Be Doping Ø 38µm (Ø 1.5 mil) ≥ 15.0 gf Min 0.5~3.5% AL2(W) 2-Inch 100m 328ft GMH2-38A100(EL3.5) 302382 C 4N Au 99.99% Gold Be Doping Ø 38µm (Ø 1.5 mil) ≥ 15.0 gf Min 0.5~3.5% AL2(W) 2-Inch 100m 328ft C-38A100(EL3.5) 340382 Note 1: Wire diameter available: 12.5µm , 15µm , 18µm , 20µm , 23µm , 25µm , 28µm , 30µm , 32µm , 33µm , 35µm , 38µm , 50µm Note 2: Green=Start • Red=End.        AuR Type - Gold (Au) High Performance Bonding Ribbon 4N   •     •   Other Sizes Type Alloy Thickness Width Breaking Load (gf) EL (%) Spool Size Length Meters Length Feet Part Number Order Nr AuR 4N Au 99.99% Gold Ribbon 12.7um (0.5mil) 75um (3.0mil) 14.3~29.5 gf 1~3% AL2 50m 164ft AuR-75x12.7A50(EL1-3) 316521 AuR 4N Au 99.99% Gold Ribbon 25um (1.0mil) 125um (5.0mil) 46.9~96.9 gf 3~8% AL2 50m 164ft AuR-125x25A50(EL3-8) 316131 AuR 4N Au 99.99% Gold Ribbon 25um (1.0mil) 250um (10.0mil) 93.8~193.8 gf 3~8% AL2 50m 164ft AuR-250x25A50(EL3-8) 316161 Note 1: AuR Type Au Gold ribbon is fabricated using a dry process. No lubrication oils are introduced during fabrication. Excellent corrosion resistance. Note 2: Tanaka AuR ribbon is made using a rolled process with stress relief (SR). Edges are smooth without sharp edges. Good surface smoothness. Note 3: Tanaka's specially formulated winding process assures consistent de-spooling and smooth bonding. Not parallel winding. Note 4: Flat Au ribbon provides an excellent solution for RF devices. Note 5: See alternative Flat Au ribbon with Be (Beryllium) additive for Stability 353xxx AUR3 series.   •   Other Sizes Note 6: AuR gold ribbon wire made in Japan. Note 7: Green=Start • Red=End.            AuR3 Type - Gold (Au) Be Doping Bonding Ribbon 4N   •     •   Other Sizes Type Alloy Thickness Width Breaking Load (gf) El (%) Spool Size Length Meters Length Feet Part Number Order Nr AuR3 4N Au 99.99% Gold Ribbon Be Doping 12.7um (0.5mil) 75um (3.0mil) 10 gf Min 1~5% AL2 30m 50m 100ft 164ft AuR3-75x12.7A30 AuR3-75x12.7A50 353523 353520 25um (1.0mil) 50um (2.0mil) 18.8~38.8 gf 2~6% AL2 30m 50m 100ft 164ft AuR3-50x25A30 AuR3-50x25A50 353103 353100 Note 1: AuR Type Au Gold ribbon is fabricated using a dry process. No lubrication oils are introduced during fabrication. Excellent corrosion resistance. Note 2: Tanaka AuR ribbon is made using a rolled process with stress relief (SR). Edges are smooth without sharp edges. Good surface smoothness. Note 3: Tanaka's specially formulated winding process assures consistent de-spooling and smooth bonding. Not parallel winding. Note 4: Flat Au ribbon provides an excellent solution for RF devices. Note 5: Flat Au ribbon with Be (Beryllium) additive for stability.   •   Other Sizes Note 6: AuR gold ribbon wire made in Japan. Note 7: Green=Start • Red=End.            Aluminum-Silicon (Al-Si1%) High Performance Bonding Wire  •   Other Sizes Type Alloy Ø Diameter ±1% μm Breaking Load (gf) El (%) Spool Size Length Meters Length Feet Part Number Order Nr TABN Al Si1% Aluminum Ø 25µm (Ø 1.0 mil) 15.0 ~17 gf 1~4% AL2(W) 2-Inch 100m 500m 328ft 1640ft TABN-25A100(EL1-4) TABN-25A500(EL1-4) 403252 403254 Note 1: Uniform distribution of Si and stable mechanical property. Annealed. Heat treated. Stress relieved (SR type). Note 2: TABN has good corrosion resistance under PCT (Pressure Cooker Test) with high humidity and temperature. Note 3: Wire diameter available: 12.5µm , 15µm , 18µm , 20µm , 23µm , 25µm , 28µm , 30µm , 32µm , 33µm , 35µm , 38µm , 50µm Note 4: Green=Start • Red=End.         Spool Reference Dimensions   Spool Dimensions   Box Dimensions & Spool Quantity Material Type A Flange Diameter B Shaft Diameter C Hub Diameter D Hub Thickness E Winding Width F Overall Width Spool Style Part Nbr Code White Inner Box QTY Spools L=7.25" W=12.5" H=4.0" Small Outer Box QTY Spools L=8.25" W=13.25" H=10" Medium Outer Box QTY Spools L=13.25" W=24" H=10" Large Outer Box QTY Spools L=13.25" W=24" H=14" Aluminum Spools AL-2(W) 2x1 Inch 58.5mm 48.8mm 50.3mm 0.75mm 26.4mm 27.9mm AL-2(W) AL-2 A 20x Spools 40x Spools 120x Spools 180x Spools AL-2(WNi) 2x1 Inch Conductive Hub 58.5mm 48.8mm 50.3mm 0.75mm 26.4mm 27.9mm AL-2(WNi) C 20x Spools 40x Spools 120x Spools 180x Spools AL4(W) 2x2 Inch 58.5mm 48.8mm 50.3mm 0.75mm 45.5mm 47.0mm AL-4(W) B 12x Spools 24x Spools 72x Spools 108x Spools AL-4(WNi) 2x2 Inch Conductive Hub 58.5mm 48.8mm 50.3mm 0.75mm 45.5mm 47.0mm AL-4(WNi) N 10x Spools 20x Spools 60x Spools 90x Spools AL-1/2 Half-Inch 17.4mm 12.7mm 13.5mm 0.40mm 18.3mm 19.1mm AL-1/2 H 5x spools - - - Polycarbonate Spools No.88 3.5 Inch 88mm 10mm 50mm 3mm 25mm 31mm No.88 Ø250~500um TANW CP-1 (ALL) TABR (ALL) P 10x Spools 50x Spools - - No.88B 3.5 Inch 89mm 10mm 71mm 3mm 25mm 31mm No.88B Ø100~200um TANW P 10x Spools 50x Spools - - No.88K 3.5-inch 88mm 11mm 50mm 3mm 31mm 37mm No.88K Ø100~600um TANW K 10x Spools 50x Spools - - No.120 4.75 Inch 120mm 10mm 54mm 4mm 30mm 38mm No.120 Ø100~600um TANW CP-1 (ALL) TABR(ALL) R 5x Spools 20x Spools - - No.120K 4.75 Inch 120mm 11mm 64mm 4mm 30mm 38mm No.120K Ø100~600um TANW T 5x Spools 20x Spools - - Note 1: Cu and PCC Pd coated Cu requires grounded Spool. Note 2: Round Wire is wound forward/cross pattern (Cross wound-cross hatch wind) Note 3: Ribbon Wire is wound forward/parallel Note 4: Start wire on spool with  Green tape.   •   End wire on spool with Red tape. Note 5: 2x white inner boxes fit into small outer box. 6x white inner boxes fit into medium outer box. 9x white inner boxes fit into large outer box.     ± Tolerance Table Alloy Ø Diameter Tolerance Spool Au Gold Type GBC , GBE , GFC, GFD GHA-2 , GLD, GLF , GMB GMG , GMH-2 , GPG-2 , GPH GSA , GSB , M3 , Y , C Ø 15µm ~ 38µm (Ø 0.6 ~ 1.5 mil) ±1 μm AL2(W) Code A AL-4 Code B Ø 40µm ~ 50µm (Ø 1.6 ~ 2.0 mil) ±2 μm Ø 60µm ~ 100µm (Ø 2.4 ~ 4.0 mil) ±3 μm Ø 125µm ~ 150µm (Ø 5.0 ~ 6.0 mil) ±5 μm Ag Silver Type SEA, SEB, SEC Ø 15µm ~ 38µm (Ø 0.6 ~ 1.5 mil) ±1 μm Ø 40µm ~ 50µm (Ø 1.6 ~ 2.0 mil) ±2 μm Al-1%Si Type TABN Ø 15µm ~ 38µm (Ø 0.6 ~ 1.5 mil) ±1 μm Ø 40µm ~ 38µm (Ø 1.6 ~ 2.0 mil) ±2 μm Cu Copper Bare & Plated Type CLR1-AT , CHR-6BT , TCB1 , CA-1 CFB-1 , TPCW Ø 15µm ~ 38µm (Ø 0.6 ~ 1.5 mil) ±1 μm AL-4(WNi) Grounded Code N Ø 40µm ~ 50µm (Ø 1.6 ~ 2.0 mil) ±2 μm Ø 60µm ~ 70µm (Ø 2.4 ~ 2.8 mil) ±3 μm Power Aluminum Type TANW Ø 100µm ~ 175µm (Ø 4.0 ~ 7.0 mil) ±7 μm 100~175μm  • No. 88B 200~600μm • No.88 Polycarbonate Code P Ø 200µm ~ 450µm (Ø 8.0 ~ 18 mil) ±7 μm Ø 500µm ~ 600µm (Ø 20 ~ 24 mil) ±10 μm Flat Ribbon Al Type TABR Width 0.8mm (32 mil) Thick 0.1mm (4 mil) W: ±0.050mm T: ±0.015mm No. 88  • No.88B Polycarbonate Code P Width 1.0mm (32 mil) Thick 0.1mm (4 mil) W: ±0.050mm T: ±0.020mm Width 1.5mm (60 mil) Thick 0.2mm (8 mil) W: ±0.075mm T: ±0.015mm No. 120 Polycarbonate Code R Width 2.0mm (80 mil) Thick 0.2mm (8 mil) W: ±0.10mm T: ±0.020mm     Recommended Storage Conditions Alloy Tanaka Type Warranty Period Time to Use Opened Package Storage Conditions Notes Au Gold GBC , GBE , GFC, GFD GHA-2 , GLD, GLF , GMB GMG , GMBH , GPG , GPH GSA , GSB M3, C, Y FA AuR 24-Months 24-Months Temp: 10~30°C Humidity: 70% Max Keep in Spool Case. Store in clean. environment     Handling Bonding Wire Spool  PDF   Green=Start • Red=End.      Difference between Gold Bump Wire and Gold Bonding Wire. Note Feature Bump Wire Bonding Wire 1 Number of Bonds One Bond Only To Die Pad or Substrate Two Bonds From Die Pad to Package. 2 Purpose/Application Single Au (gold) wire is squashed. Wire is then reflowed (melted) to form a bump for a flip chip. Bonding from the die to the leadfame (or substrate) with a loop (wedge or stitch). 3 Repeatable Wire Break Bumping wire is intended to break close to neck area of first bond. Bonding wire has a longer HAZ (heat affected zone) to permit the wire to be kinked or looped and pan out for next bond (wedge or stitch) 4 Grain Structure Dopants added for grain structure during annealing process to allow repeatable wire break after the stud bump formation to make wire softer for wire cut/break mode. Grain structure in bonding wire enables formation of loop or kink.     EL - Elongation Summary Gold Wire Sorted by Type   PDF Type Purity Ø15μm 0.6 mil Ø18μm 0.7 mil Ø20μm 0.8 mil Ø23μm 0.9 mil Ø25μm 1.0 mil Ø28μm 1.1 mil Ø30μm 1.2 mil Ø32μm 1.25 mil Ø35μm 1.4 mil Ø38μm 1.5 mil Ø50μm 2.0 mil C 4N - - 2.0~6.0% 2.0~6.0% 2.0~6.0% 2.0~7.0% 2.0~9.0% 3.0~9.0% 3.0~9.0% 3.0~10% - FA 4N - - 2.0~6.0% 2.0~6.0% 2.0~7.0% 2.0~7.0% 2.0~9.0% 3.0~9.0% 3.0~9.0% 3.0~12% - GBC 2N 1.5~4.0% 1.5~4.0% 1.5~4.0% 1.5~4.0% 1.5~5.0% 1.5~5.0% 1.5~5.0% 1.5~5.0% 1.5~6.0% 1.5~6.0% - GBE 4N 1.0~4.0% 1.0~4.0% 1.0~4.0% 1.0~4.0% 1.0~5.0% 1.0~5.0% 1.0~5.0% 1.0~5.0% 1.0~6.0% 1.0~6.0% - GFC 4N 1.0~7.0% 1.0~7.0% 1.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% - - - - GFD 4N 1.0~7.0% 1.0~7.0% 1.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% - - - - GHA-2 4N - - 2.0~6.0% 2.0~6.0% 2.0~7.0% 2.0~7.0% 2.0~9.0% 3.0~9.0% 3.0~9.0% 3.0~9.0% - GLD-H 4N 3.5% Max 3.5% Max 3.5% Max 3.5% Max 3.5% Max 3.5% Max 3.5% Max 3.5% Max 4.5% Max 4.5% Max 4.5% Max GLD 4N 2.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~9.0% 3.0~9.0% 3.0~9.0% 3.0~10% 3.0~10% GLF 4N 2.0~6.0% 2.0~6.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~9.0% - - - - GMB-2 4N - - 2.0~6.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~9.0% 3.0~9.0% 3.0~9.0% 3.0~10% - GMG 4N 1.0~7.0% 1.0~7.0% 1.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% - - - - GMH 4N 1.0~7.0% 1.0~7.0% 1.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% - - - - GMH-2 4N 1.0~7.0% 1.0~7.0% 1.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% - - - - GPG 2N 1.0~7.0% 1.0~7.0% 1.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% - - - - GPG-2 2N 1.0~7.0% 1.0~7.0% 1.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% - - - - GPG-3 2N 1.0~7.0% 1.0~7.0% 1.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% 2.0~7.0% - - - - GPH 2N 1.0~7.0% 1.0~7.0% 1.0~7.0% 2.0~8.0% 2.0~8.0% 2.0~8.0% 2.0~8.0% - - - - GSA 4N 1.0~6.0% 1.0~6.0% 1.0~7.0% 1.0~7.0% 1.0~7.0% 1.0~7.0% 1.5~8.5% 1.5~8.5% 1.5~8.5% 1.5~8.5% 1.5~8.5% GSB 4N 1.0~6.0% 1.0~6.0% 1.0~7.0% 1.0~7.0% 1.0~7.0% 1.0~7.0% 1.5~8.5% - - - - M3 4N - - 2.0~6.0% 2.0~7.0% 2.0~7.0% 2.0~8.0% 2.0~9.0% 3.0~9.0% 3.0~9.0% 4.0~12% 4.0~12% Y 4N - - 2.0~5.0% 2.0~6.0% 2.0~6.0% 2.0~6.0% 2.0~7.0% 3.0~7.0% 3.0~8.0% 4.0~8.0% - Note 1: Actual elongation tends to be the middle of each range. Example: The EL of Ø25μm GSA is shown as 1.0~7.0% in above table. However average Ø25μm GSA EL tests around 4%   BL - Breaking Load (g) Summary Gold Wire Sorted by Type   PDF Type Purity Ø15μm 0.6 mil Ø18μm 0.7 mil Ø20μm 0.8 mil Ø23μm 0.9 mil Ø25μm 1.0 mil Ø28μm 1.1 mil Ø30μm 1.2 mil Ø32μm 1.25 mil Ø35μm 1.4 mil Ø38μm 1.5 mil Ø50μm 2.0 mil C 4N - - 4.5~8.0g 5.5~9.5g 7.5~11.5g 11.0~15.0g 11.0~15.5g 13.0~18.0g 15.0~25.0g 18.0~28.0g - FA 4N - - 5.0~8.7g 6.5~11.5g 7.7~13.5g 9.7~17.0g 11.1~19.5g 12.7~22.2g 15.2~26.5g 17.9~31.3g - GBC 2N ≥3.0g ≥5.0g ≥9.0g ≥10.0g ≥11.0g ≥13.0g ≥15.0g ≥18.0g ≥27.0g ≥30.0g - GBE 4N ≥3.0g ≥6.0g ≥8.0g ≥12.0g ≥14.0g ≥17.0g ≥20.0g ≥23.0g ≥27.0g ≥32.0g - GFC 4N 2.8~5.6g 4.0~8.0g 5.0~9.9g 6.5~13.1g 7.7~15.5g 9.7~19.4g 11.1~22.3g - - - - GFD 4N 3.3~6.1g 4.8~8.8g 5.9~10.8g 7.8~14.3g 9.2~16.9g 11.5~21.2g 13.2~24.4g - - - - GHA-2 4N - - 4.0~8.0g 7.0~11.0g 9.0~13.0g 11.0~16.0g 13.0~18.0g 15.0~21.0g 19.0~25.0g 21.0~30.0g - GLD-H 4N ≥2.5g ≥4.0g ≥6.0g ≥10.0g ≥16.0g ≥18.0g ≥20.0g ≥23.0g ≥27.0g ≥35.0g ≥45.0g GLD 4N 1.7~3.7g 4.9~7.4g 6.0~9.0g 8.0~12.0g 10.0~14.0g 12.0~17.0g 14.0~20.0g 15.0~23.0g 19.0~27.0g 22.0~35.0g 32.0~45.0g GLF 4N 3.1~5.9g 4.5~8.5g 5.6~10.5g 7.4~13.9g 8.7~16.4g 10.9~20.6g 12.5~23.7g - - - - GMB-2 4N - - 5.0~9.0g 7.5~11.5g 9.0~14.0g 11.0~16.0g 13.0~19.0g 15.0~22.0g 20.0~26.0g 23.0~33.0g - GMG 4N 3.6~6.4g 5.1~9.1g 6.3~11.3g 8.4~14.9g 9.9~17.6g 12.4~22.1g 14.3~25.4g - - - - GMH 4N 3.7~5.7g 5.4~8.1g 6.7~10.1g 8.8~13.3g 10.4~15.7g 13.0~19.7g 15.0~22.6g - - - - GMH-2 4N 3.7~6.5g 5.4~9.4g 6.7~11.6g 8.8~15.3g 10.4~18.1g 13.0~22.7g 15.0~26.1g - - - - GPG 2N 3.7~5.7g 5.4~8.1g 6.7~10.1g 8.8~13.3g 10.4~15.7g 13.0~19.7g 15.0~22.6g - - - - GPG-2 2N 3.5~6.3g 5.0~9.0g 6.2~11.1g 8.9~16.0g 9.7~17.4g 12.1~21.8g 13.9~25.1g 15.0~23.0g 19.0~27.0g - - GPG-3 2N 3.3~6.1g 4.8~8.8g 5.9~10.8g 7.8~14.3g 9.2~16.9g 11.5~21.2g 13.2~24.4g - - - - GPH 2N 3.3~6.1g 4.8~8.8g 5.9~10.8g 7.8~14.3g 9.2~16.9g 11.5~21.2g 13.2~24.4g - - - - GSA 4N 2.5~5.3g 3.6~7.6g 4.4~9.4g 5.9~12.5g 7.0~14.7g 8.7~18.5g 10.0~21.1g 11.4~24.0g - 16.0~33.8g 27.6~58.3g GSB 4N 2.9~5.7g 4.2~8.2g 5.2~10.1g 6.9~13.5g 8.1~15.8g 10.2~19.9g 11.6~22.7g - - - - M3 4N - - 6.0~9.0g 7.0~11.5g 9.0~13.5g 12.0~17.0g 13.0~18.0g 15.0~20.0g 18.0~26.0g 20.0~30.0g 30.0~50.0g Y 4N - - 3.5~6.6g 6.4~8.1g 6.5~11.4g 8.5~14.7g 10.0~17.1g 11.4~19.5g 14.0~23.6g 17.6~28.9g - Note 1: Actual elongation tends to be the middle of each range. Example: The EL of Ø25μm GSA is shown as 1.0~7.0% in above table. However average Ø25μm GSA EL tests around 4%   RLC Parametric Data Material Alloy Ø Mil Ø um R milli-ohm/mm 0 Hz (DC) R milli-ohm/mm 100 MHz Ls nH/mm 100~400 MHz Cs pF/mm 100~400 MHz Gold (4N Au) Gold (2N Au) PCC (4N Cu) 0.6mil 15um 163.62 191.44 115.70 237.01 277.31 177.42 1.184 0.073 Gold (4N Au) Gold (2N Au) PCC (4N Cu) 0.7mil 18um 119.98 140.38 84.83 182.77 213.85 137.64 1.140 0.077 Gold (4N Au) Gold (2N Au) PCC (4N Cu) 0.8mil 20um 91.74 107.24 64.76 148.55 173.65 111.01 1.114 0.081 Gold (4N Au) Gold (2N Au) PCC (4N Cu) 0.9mil 23um 72.24 84.45 51.07 122.39 143.07 92.37 1.074 0.085 Gold (4N Au) Gold (2N Au) PCC (4N Cu) 1.0mil 25um 58.40 68.27 41.25 103.47 120.95 79.02 1.043 0.092 Gold (4N Au) Gold (2N Au) PCC (4N Cu) 1.1mil 28um 49.08 56.21 33.99 88.68 103.66 68.40 1.012 0.098 Gold (4N Au) Gold (2N Au) PCC (4N Cu) 1.2mil 30um 40.54 47.40 28.66 78.62 91.90 60.52 1.010 0.104 RLC Electrical Parametric Data PDF     Electrical Resistance Ω Ohms per 10mm Length Symbol Material Ø15μm 0.6 mil Ø18μm 0.7 mil Ø20μm 0.8 mil Ø25μm 1.0 mil Ø30μm 1.2 mil Ø32μm 1.25 mil Ø33μm 1.3 mil Ø35μm 1.4 mil Ø38μm 1.5 mil Ø50μm 2.0 mil Resistivity μΩ•cm Au 4N Gold 1.30 0.49 0.73 0.47 0.33 0.29 0.27 0.24 0.20 0.12 2.3 Au 2N Gold 1.75 1.22 0.99 0.63 0.44 0.39 0.36 0.32 0.27 0.16 3.1 Cu CLR1-A 1.08 0.75 0.61 0.39 0.27 0.24 0.22 0.20 0.17 0.10 1.9 Cu CFB-1 1.08 0.75 0.61 0.39 0.27 0.24 0.22 0.20 0.17 0.10 1.9 Cu CA-1 1.24 0.86 0.70 0.45 0.31 0.27 0.26 0.23 0.19 0.11 2.2 Ag SEA 2.66 1.85 1.50 0.96 0.67 0.58 0.55 0.49 0.41 0.24 4.7 Ag SEB 1.87 1.30 1.05 0.67 0.47 0.41 0.39 0.34 0.29 0.17 3.3 Ag SEC 1.47 1.02 0.83 0.53 0.37 0.32 0.30 0.27 0.23 0.13 2.6 Al Al-1%Si TANW 1.75 1.22 0.99 0.56 0.44 0.39 0.36 0.32 0.27 0.16 3.1   Power Al Wire - Electrical Resistance Ω Ohms per 10mm Length Symbol Material Ø100μm 4mil Ø125μm 5mil Ø150μm 6mil Ø175μm 7mil Ø200μm 8mil Ø250μm 10mil Ø300μm 12mil Ø350μm 14mil Ø380μm 15mil Ø400μm 16mil Ø450μm 18mil Ø500μm 20mil Resistivity μΩ•cm Al TANW 0.0344 0.0220 0.0153 0.0112 0.0086 0.0055 0.0038 0.0028 0.0024 0.0021 0.0017 0.0014 2.7     Physical Properties (General) Item Unit Gold Copper Aluminum Silver Palladium Platinum Atomic Symbol   Au Cu Al Ag Pd Pt Atomic Number   79 29 13 47 46 78 Atomic Weight   196.96655 63.546 26.981538 107.8682 106.42 195.078 Melting Point K 1336 1356 933 1234 1825 2042 Density (20°) g • cm-3 19.32 8.92 2.70 10.50 12.02 21.45 Resistivity (20°) μΩ • cm 2.300 1.694 2.700 1.630 10.80 10.58 Thermal Conductivity (0~100°) Wm-1 • K-1 315.5 397 238 425 75.2 73.4 Specific Heat (0~100°) JKg-1 • K-1 130 386 917 234 247 134.4 CTE (0~100°) PPM/°C 14.1 17.0 23.5 19.1 11.0 9.0 Young's Modulus G•Pa 88.3 136 69 100.5 121 169.9 Shear Modulus G•Pa 29.6 - 26.0 31.3 - -     Physical Properties By Wire Type Item Unit Gold 4N-Au GFC Type Silver Alloy SEC Type Bare Copper 4N Cu CFB-1 Type Coated Copper 4N PCC CLR-1AT CHR Type Test Method Hardness Free Air Ball Hardness of Wire Hv 30~50Hv 65~85Hv 45~65Hv 65~85Hv 55~75Hv 60~80Hv 60~80Hv 70~90Hv Vickers Tester Density (20°C) g / cm3 19.32 10.54 8.92 8.97 ASTM Thermal Conductivity (0~100°) W/m per K 315.5 281.5 385 385 Theoretical Value Linear CTE (0~100°) PPM/°K 14.1 19.0 17.0 17.0 Metals Data Book Elastic Modulus G•Pa 65~85 50~70 50~90 60~85 Tensile Tester Resistivity (20°C) μΩ • cm 2.3 2.6 1.9 19 Kelvin Method 4-terminal Melting Point °C 1063°C 980°C 1084°C 1084°C Theoretical Value       Wire Part Number System     GSA       -       25         A         100             Type   Ø Diameter  µm Spool Type Length Meters Options Gold 4N (Au99.99%) GSA = (300xxx) Stable Stitch GBE = (301xxx) Bumping Wire GMH-2 = (302xxx) High Strength M3 = (303xxx) Standard Wire GFD = (306xxx) Fine Pitch GLF = (307xxx) Low Loop GLD-H = (309xxx) Wedge to Wedge AuR = (316xxx/326xxx) Au Ribbon AuR3 = (353xxx) Au Ribbon Be Doping AuS = Au Ribbon Gold 2N (Au99%) Alloy GPG-2 = (304xxx) High Reliability GPG = (335xxx) High Reliability GBC = (305xxx) Bumping Wire GPH = (308xxx) High Reliability Gold (Other) FA = (330xxx) Soft Touch Y = (331xxx) Soft Touch GMG = (332xxx) High Strength GMH = (333xxx) High Strength GFC = (334xxx) Fine Pitch GPG = (335xxx) 2N Au Alloy GSB = (336xxx) Stable Stitch GMB-2 = (337xxx) Smart Card GHA-2 = (338xxx) High Loop GL-2 = (339xxx) High Strength C = (340xxx) Legacy GPG-3 = (341xxx) Hi Rel GLD = (349xxx) Wedge to Wedge Aluminum TANW = Al Round TABR = Al Ribbon TALF = 99% Al TABN = Al-1%Si TABW = Al-1%Si Silver Ag Alloy SEA = Silver SEB = Silver SEC = Silver Palladium Pd Coated Copper CLR-1AT = 4N Pd Cu - Original Chemistry CLR-2AT = 4N Pd Cu - Enhanced Chemistry CHR-2BT = 4N Pd Cu - Standard Chemistry CHR-5BT = 3N Pd Cu - Fine Pitch High Rel CHR-6BT = 2N Pd Cu - Automotive Hi Rel Bare Copper CA-1 = 2N Copper Alloy CFB-1 = 4N Standard Bare Cu CP-1 = 4N Cu High Power Obsolete Copper TPCW = 4N High Purity TCA1 = 4N Cu Fine Pitch TCB1 = 4N Cu Good Stitch   Code   Mil 12.5     0.5mil 15     0.6mil 18     0.7mil 20     0.8mil 23     0.9mil 25     1.0mil 28     1.1mil 30     1.2mil 32   1.25mil 33     1.3mil 35     1.4mil 38     1.5mil 50     2.0mil 60     2.4mil 70     2.7mil 75     3.0mil 80     3.2mil TANW Large Dia Wire µm     Mil 100µm   4mil 125µm   5mil 150µm   6mil 175µm   7mil 200µm   8mil 250µm   10mil 300µm   12mil 350µm   14mil 380µm   15mil 400µm   16mil 450µm   18mil 500µm   20mil 600µm   24mil Al Ribbon Wire 800x100 = 30 x 4.0mil 1000x100 = 40 x 4.0mil 1500x200 = 60 x 8.0mil 2000x200 = 80 x 8.0mil More Ribbon Sizes Au Ribbon Wire 38x12.7 = 1.5 x 0.5mil 50x12.7 = 2.0 x 0.5mil 75x12.7 = 3.0 x 0.5mil 100x12.7 = 4.0 x 0.5mil 125x12.7 = 5.0 x 0.5mil 150x12.7 = 6.0 x 0.5mil - - - - - - 50x25 = 2.0 x 1.0mil 75x25 = 3.0 x 1.0mil 100x25 = 4.0 x 1.0mil 125x25 = 5.0 x 1.0mil 150x25 = 6.0 x 1.0mil 200x25 = 8.0 x 1.0mil 250x25 = 10 x 1.0mil - - - - - - 125x50 = 5.0 x 2.0mil More Ribbon Sizes Aluminum Spool A = 2"x1" AL-2W Spool B = 2"x2" AL-4 Spool H = 1/2" x 3/4" 1/2-Inch Spool AL-1/2 Spool Aluminum Spool Conductive Nickel Core Grounded C = 2"x1" AL-2 WNI Spool N = 2"x2" AL-4 WNi Spool Cu Wire Polycarbonate Spool P = 3.5"x1.25" No.88 TABR=Al Ribbon CP-1 Copper K = 3.5"x1.25" No.88K TANW=Power Aluminum R = 4.7"x1.50" No.120 TABR=Al Ribbon CP-1=Copper T = 4.7"x1.50" No.120K TANW=Power Aluminum Meters   Feet 25       75ft 50       150ft 100     300ft 200      600ft 300    1000ft 400    1300ft 500    1500ft 1000    3000ft 2500    8000ft 5000    16000ft Meters controlling dimension Go to: 1/2" Spools Blank = Standard Green=Start Red=End. A = Rev A B = Rev B etc     Wire Order Number       3         0         2         25         1     Alloy Shape Type Ø Diameter Length Code • Description 3 = Gold (Au) 4 = Aluminum (Al) 5 = Silver (Ag) 7 = Copper (Cu) Code   Description 0 = Round Wire 3 = Round Wire 4 = Round Wire 1 = Flat Ribbon 2" Spool 2 = Flat Ribbon 1/2" Spool 5 = Flat Ribbon 2" Spool Round Gold Wire (Au) 0 = GSA 1 = GBE 2 = GMH-2 3 = M3 4 = GPG-2 5 = GBC 6 = GFD 7 = GLF 8 = GPH 9 = GLD-H Round Gold Wire (Au) More 30 = FA 31 = Y 32 = GMG 33 = GMH 34 = GFC 35 = GPG 36 = GSB 37 = GMB-2 38 = GHA-2 39 = GL-2 40 = C 41 = GPG-3 49 = GLD Flat Gold Wire (Au) 6 = AuR 53 = AuR3 Be Doping Aluminum Wire (Al) 1 = TALF (Discontinued) 2 = TABR 3 = TABN 4 = TABW 5 = TANW Silver Wire (Ag) 1 = SEA 2 = SEB 3 = SEC Copper Wire (Cu) 0 = CLR-1AT (4N Pd Coated Cu) 1 = CA-1 (2N Bare Cu Alloy) 2 = CFB-1 (4N Bare Cu) 3 = CHA (Discontinued) 4 = CHR-2BT (4N Pd Coated Cu) 5 = CHR-5BT (3N Pd Coated Cu) 6 = CHR-6BT (2N Pd Coated Cu) 7 = CP-1 (4N Bare Power Cu) 8 = CLR-2AT (4N Pd Coated Cu) 9 = Future µm     Mil 12     0.5mil 15     0.6mil 18     0.7mil 20     0.8mil 23     0.9mil 25     1.0mil 28     1.1mil 30     1.2mil 32     1.25mil 33     1.3mil 38     1.5mil 50     2.0mil 60     2.4mil 70     2.7mil 75     3.0mil 80     3.2mil TANW, CP-1 and Y Large Dia Wire Code     µm     Mil 00   100µm   4mil 01   125µm   5mil 02   150µm   6mil 03   175µm   7mil 04   200µm   8mil 05   250µm   10mil 06   300µm   12mil 07   350µm   14mil 08   380µm   15mil 09   400µm   16mil 10   450µm   18mil 11   500µm   20mil 12   600µm   24mil Al Ribbon Wire 48 = 0.8 x 0.1mm 49 = 1.0 x 0.1mm 85 = 1.5 x 0.2mm 86 = 2.0 x 0.2mm Au Ribbon Wire 51 = 25 x 12.7um 38 = 38 x 12.7um 50 = 50 x 12.7um 52 = 75 x 12.7um 53 = 100 x 12.7um 54 = 125 x 12.7um 55 = 150 x 12.7um - - - - 10 = 50 x 25um 11 = 75 x 25um 12 = 100 x 25um 13 = 125 x 25um 14 = 150 x 25um 15 = 200 x 25um 16 = 250 x 25um - - - - 22 = 125 x 50um More Ribbon Sizes Code Meters Feet 9 = 25m    (75ft) 0 = 50m  (150ft) 1 = 100m (300ft) 2 = 200m (600ft) 3 = 300m (1000ft) 4 = 400m (1300ft) 5 = 500m (1500ft) 6 = 1000m (3000ft) 7 = 2500m (8000ft) 8 = 5000m (16000ft) Meters controlling dimension Go to: 1/2" Spools   TopLine Corporation 95 Highway 22 W Milledgeville, GA 31061, USA Toll Free USA/Canada (800) 776-9888 International: 1-478-451-5000  •  Fax: 1-478-451-3000 Email: sales@topline.tv ©2021 TopLine. All Rights Reserved. Home